Establish your business’s payment requirements
Build the shortlist around a representative month of invoices, including the largest payment and the most difficult corridor. A headline country count cannot answer whether a particular customer can pay you or a particular supplier can receive funds.
Map incoming and outgoing corridors and currencies
For each outgoing flow, record the UK funding account and currency, beneficiary country, invoice currency and required arrival date. For each incoming flow, record the customer’s country, sending currency, receiving instructions and the currency you ultimately need.
Separate four capabilities: funding, holding, conversion and settlement. A platform might send a local currency without allowing you to hold it, or receive USD only through specified account details. Local receiving details and SWIFT instructions are not interchangeable.
Check who may send funds. Customer invoice payments, transfers from your own bank and payments from an unrelated third party may have different rules. The account name, permitted payer and invoice reference must fit the approved collection arrangement.
Collecting payment for your own invoices is different from holding or transmitting money on behalf of clients. Declare the latter model separately:
Kanzum’s business-use terms, for example, require express approval for specified intermediary activities.
Define volumes, deadlines and eligibility constraints
List monthly payment value, transaction count, typical and maximum invoice size, and peak-season requirements. Check per-payment and daily limits, any funding-method limits, and whether larger amounts require advance review.
Eligibility also depends on legal structure and activity. For example,
Wise’s business eligibility guidance currently excludes new registrations for UK trusts and specified limited partnerships.
Airwallex lists the UK as an eligible registration location, but its
account eligibility rules also require industry and risk approval.
Provider acceptance does not establish that the underlying trade is lawful. Review counterparties, ownership and the goods or services against
UK financial sanctions guidance and applicable trade restrictions. Providers may impose narrower commercial restrictions than the law requires.
Compare providers for UK B2B payments and collections
This comparison covers business services rather than a ranking.
Compare the examples by direction, currency and rail. Published network ceilings and transit estimates are not approved account limits or end-to-end delivery promises: funding, conversion and compliance review can add time. Where no account-specific limit has been verified, this is an evidence gap, not proof that a capability is unavailable. Detailed pricing follows the provider profiles.
UK B2B Provider Comparison
Provider | UK business availability | Outgoing and incoming capabilities | Illustrative corridors, funding and balances | Published limits, delivery and support |
|---|
| Published UK-related trade flows; UK entity onboarding and account entitlements require a specific service arrangement. | | The UK–Africa trade example illustrates UK buyer funding in GBP/EUR and exporter receipts in USD/EUR/GBP, with approved reverse flows. It does not establish the same receiving accounts for UK companies. | No UK customer-level numerical ceiling or universal delivery period verified for this comparison. Tracking and a personal manager are described; operating arrangements are flow-specific. |
|---|
| UK businesses can apply, subject to entity and activity restrictions. | | Example: GBP-funded payment to a US supplier in USD; USD customer receipts retained or converted to GBP. Check funding, holding and receiving separately in the availability checker, selecting Business and United Kingdom. | The USD guide lists USD 1 million per local ACH payout and usual ACH delivery of 0–3 working days after funding and conversion. Other methods and funding sources have different limits. Batch payments, tracking and phone, email or chat support. |
|---|
| UK registration is supported, subject to account approval. | | Example: GBP funding converted for a USD payment to a US bank. Its collection guide lists US USD receipts through ACH or Fedwire and UK GBP receipts through Faster Payments, CHAPS or Bacs, subject to account availability. | The US payout guide lists a USD 15 million ACH network ceiling; non-US customers use next-day ACH with 1–2 business-day transit. These figures do not establish a UK customer’s approved limit. Batch payments and email support; onboarding support varies by plan. |
|---|
| UK commercial services through the entities identified in its UK legal documents, subject to onboarding. | Advertises payouts in 140+ currencies and collections in 100+ currencies across several methods. The latter is not a count of local bank-transfer receiving accounts. | The directional matrix lists Nigeria/NGN, China/CNY and India/INR as payout destinations. Receiving methods, funding currency and approval for the UK business must be assessed separately. Holding balances cover 60+ currencies for up to 180 days under published terms. | No UK customer-level numerical ceiling verified for this comparison. Real-time or same-day options on eligible routes, SWIFT gpi status and alerts; service and escalation arrangements depend on the agreement. |
|---|
Kanzum’s distinctive emphasis is the operating context of trade across Africa, Asia and MENA: supplier payments, receipts, currency needs and commercial references kept together. Its
Europe and UK–Africa corridor page describes exporter receipts and approved reverse flows, with personal support through WhatsApp, Telegram and email.
That makes it relevant to investigate for businesses whose trade routes need human coordination. However, the public corridor page mainly illustrates African exporters receiving buyer payments. A UK business should obtain written acceptance of its legal entity, both required payment directions and partner arrangement before treating Kanzum as an operational option. Its
terms make availability conditional on jurisdiction, customer profile and service configuration.
Wise Business is a practical candidate for finance teams seeking self-service transfers, supported currency balances and repeat invoice processing. Its
business payment tools include invoice uploads, batch payments and approval controls, while
accounting integrations reduce manual reconciliation.
The important limitation is directional coverage. Receiving details in a currency do not imply every sending country or payment method is accepted. Evaluate the actual customer pay-in and supplier payout, rather than relying on a global coverage headline.
Airwallex brings
multi-currency collections and
supplier transfers into a broader business workflow. It is relevant when receipts will fund later payments and the finance team needs batch processing or connected accounting operations.
For invoice collections, assess bank-transfer receiving details separately from card or checkout acceptance. Match workflow requirements to the
published UK plan features and support: an account offering the right currencies may still require a different service tier for the controls or implementation support your team needs.
Convera combines broad commercial payment coverage with currency-risk services. Its
business payment platform describes SWIFT gpi tracking and automated status alerts, while its
forward contracts address future currency obligations.
This combination is relevant for firms managing scheduled supplier payments alongside international receipts. Its
published holding-balance limit of up to 180 days matters if customer proceeds will remain unspent for longer. Assess the receiving method and business terms attached to the actual UK service.
Calculate the full cost and manage FX exposure
Measure two outcomes: the sterling needed to deliver the supplier’s invoice amount in full, and the usable sterling remaining from a customer receipt. Comparing transfer fees alone misses both FX pricing and deductions elsewhere in the payment chain.
Compare the complete transaction cost
Request quotes for identical amounts, currencies, rails and execution times. Compare the offered exchange rate with the same timestamped reference rate, then add funding, transfer, collection, intermediary and beneficiary-bank charges. Include account subscriptions, minimum commitments and exception charges in the monthly business case.
Published pricing provides useful starting points:
- Wise Business pricing lists a £50 setup charge for receiving account details, currency-dependent sending and conversion fees from 0.24%, and a USD 6.11 receiving fee for USD wire and SWIFT payments. This receiving charge applies to USD wire/SWIFT receipts, not every USD collection method. Its starting percentage is not a quote for every corridor.
- Airwallex’s UK pricing lists FX margins of 0.5% above interbank rates for major currencies and 1% for others, plus £10–£20 for SWIFT transfers. Explore costs £19 per month per business legal entity. The charge is waived when qualifying deposits reach £10,000 equivalent during the subscription period, or combined wallet balances reach £10,000 equivalent at the period end, subject to its terms. Qualifying deposits include bank deposits, direct debits and payment-processing volumes; published monthly prices exclude VAT.
- Kanzum uses individual FX terms and applicable pricing schedules. Convera UK Financial Limited’s corporate terms provide for a client fee schedule, available on request. Neither offers a universal comparable invoice quote in the material reviewed.
For SWIFT payments, establish who bears charges: OUR generally allocates them to the sender, SHA shares them, and BEN allocates them to the beneficiary where offered. Check the route’s actual full-amount treatment. A charge instruction alone is not sufficient evidence that your supplier will receive the invoice amount without deductions.
Check conversion timing and funding commitments
A displayed rate is not necessarily a booked rate. Identify quote expiry, the point of acceptance, the funding deadline and what happens if funds arrive late. Automatic conversion can remove your control over timing; holding a foreign currency preserves flexibility but leaves exposure against sterling.
Prefunding also ties up working capital. Calculate the amount and number of days committed before execution, including weekends and review periods. Retaining customer receipts for supplier payments in the same currency can avoid two conversions, provided currency, amount and timing align. It does not remove any unmatched exposure.
As a separate matched-currency illustration, receiving USD 12,500 and using it to settle a USD 12,500 supplier invoice requires no FX conversion and leaves no residual USD balance. Assuming zero receiving, holding and payout charges, the service cost is also zero; actual charges may apply. This illustrates avoiding conversion, not a third offer comparable with the GBP conversion quotes below.
Forwards can fix the rate for a future invoice, but create obligations if the trade changes. Review deposits, margin calls, settlement and cancellation exposure.
Convera’s corporate terms, for example, contain advance-payment and margin-call provisions for specified forward contracts.
The examples below use hypothetical Offers A and B, not any named provider’s prices. Both assume the same quote timestamp, a USD 12,500 invoice and a reference rate of GBP 1 = USD 1.25, giving a reference value of GBP 10,000. All illustrated charges are stated; no additional charges are assumed. The outgoing route is UK GBP funding to a US supplier’s USD account; the incoming route reverses that business flow.
Hypothetical USD Invoice Cost Comparison
Flow and fictional offer | Rate and charges assumed | Calculation | Final outcome | Cost versus reference value |
|---|
Outgoing invoice: Offer A | GBP 1 = USD 1.24; GBP 10 fee paid separately; no recipient deductions | USD 12,500 ÷ 1.24 + GBP 10 | GBP 10,090.65 outlay; supplier receives USD 12,500 | GBP 90.65 |
|---|
Outgoing invoice: Offer B | GBP 1 = USD 1.245; GBP 20 fee paid separately; no recipient deductions | USD 12,500 ÷ 1.245 + GBP 20 | GBP 10,060.16 outlay; supplier receives USD 12,500 | GBP 60.16 |
|---|
Incoming invoice: Offer A | Customer sends USD 12,500; USD 10 receiving deduction; GBP 1 = USD 1.26; GBP 10 conversion charge | (USD 12,500 − USD 10) ÷ 1.26 − GBP 10 | GBP 9,902.70 net proceeds | GBP 97.30 |
|---|
Incoming invoice: Offer B | Customer sends USD 12,500; no receiving deduction; GBP 1 = USD 1.255; GBP 20 conversion charge | USD 12,500 ÷ 1.255 − GBP 20 | GBP 9,940.16 net proceeds | GBP 59.84 |
|---|
Verify the legal relationship and protection of funds
The platform brand, the contracting company and the institution holding money can be different organisations. Establish the legal chain before directing recurring customer receipts or prefunding large supplier invoices.
Identify the contracting entity and applicable permissions
Read the service agreement for the entity providing collections, FX and payouts. Use the
FCA Financial Services Register to check relevant UK status, permissions, restrictions and any agency relationship. Match the legal name and contact details to the contract; group membership alone does not establish the permissions of the company serving you.
Published provider disclosures offer useful starting identifiers:
A firm reference number identifies an entity, not blanket permission for every product or route. Match the applicable entity, service and restrictions to your contract and current register entry.
Kanzum’s terms identify Kanzum Pay Ltd in Canada and FINTRAC money-services-business registration, with services involving partners. That registration does not establish UK authorisation. For a proposed UK arrangement, obtain the responsible entities and applicable legal basis in writing.
Also identify governing law, dispute jurisdiction and responsibility where a partner executes the payment. Cross-border rights depend on the service arrangement; do not assume every leg has the same UK protections.
Understand where funds are held and how they are protected
FCA guidance distinguishes safeguarding from FSCS protection. UK authorised payment institutions and electronic money institutions are required to safeguard relevant customer funds; failure of the non-bank provider is not covered by FSCS deposit compensation. Recovery can take time and may involve a shortfall. Small payment institutions are not required to safeguard.
Establish which funds qualify, when protection starts and how it applies to balances and payments in transit. A partner bank’s involvement does not automatically make your platform balance a deposit account in your company’s name. Ask how unused funds are returned on closure, and treat any forward-contract collateral separately from ordinary payment funds.
Kanzum’s partner-based structure needs its own assessment. Its
funds guidance distinguishes segregation from safeguarding under particular partner arrangements; do not automatically attribute the UK framework above to every Kanzum flow. Keep essential near-term liquidity accessible outside the proposed setup.
Review business-specific liability and redress
Read the provisions covering unauthorised instructions, incorrect execution, reporting deadlines, liability caps, suspension and termination. The
FCA’s corporate opt-out guidance explains that certain protections can be varied by agreement for customers outside protected categories, including businesses that are not micro-enterprises. Account terms can contain that agreement.
Access to the
Financial Ombudsman Service is also conditional. Its small-business criteria include turnover below £6.5 million and either fewer than 50 employees or a balance sheet below £5 million, subject to its detailed eligibility rules. The assessment can include linked or partner enterprises and special rules for temporary threshold exceedances. If your business falls outside the Service’s eligibility rules, assess the contractual complaint and dispute-resolution routes before onboarding.
Mandatory APP reimbursement is not general protection for commercial invoice payments. The
UK APP reimbursement framework covers eligible domestic Faster Payments and CHAPS cases. For commercial business claimants, protection is limited to qualifying micro-enterprises; ordinary larger companies are not eligible under these claimant rules. International payments themselves are excluded. A domestic funding leg or UK-held borderless account requires separate analysis of the payment and account involved.
Prepare onboarding and transaction documents
Account approval and approval to execute a particular trade payment are different milestones. Prepare one evidence pack that explains the business and the flows it expects to process.
Build one document checklist
- Company: registration details, incorporation and constitutional documents, trading address and ownership chart.
- People: identification and address evidence for relevant directors, beneficial owners and authorised applicants, plus any required identity checks and evidence that the applicant is authorised to act for the company.
- Activity and funds: products or services, website or trading evidence, expected countries and volumes, and source-of-funds evidence.
- Transactions: invoices, contracts or purchase orders, payer and beneficiary details, payment purpose and, where relevant, shipment or trade documents.
Requirements vary by entity and service.
Airwallex’s UK document guide, for example, specifies incorporation and constitutional documents for limited companies, identification and address details for directors and owners meeting its threshold, and an applicant liveness check. Where the applicant is not a director, its guide also calls for an authorisation letter. This is a provider-specific checklist, not a universal UK document rule.
Use secure submission channels, keep the pack current and establish who answers follow-up requests. Do not promise a supplier a payment date solely because an account application has been submitted.
Confirm execution, delivery and exception handling
For recurring invoices, operational fit means fewer manual interventions and a clear owner when something goes wrong. Test the process with the people who will actually authorise, track and reconcile payments.
Test controls and reconciliation
Separate beneficiary creation from payment approval, use multi-factor authentication and restrict permissions by role. Independently verify changed supplier bank details using an established contact channel; an emailed invoice change should not be sufficient authority.
Test batch uploads, approval thresholds and audit records with realistic invoices. On collections, check whether payer names and references survive into the export or accounting integration, including partial payments and multiple invoices paid together. The finance team should be able to reconcile gross invoice value, deductions, FX and net settlement without reconstructing the transaction from support messages.
Verify delivery and support commitments
Track four milestones: funding cleared, conversion executed, payment released and beneficiary credited. A “sent” status only answers one of those questions. Record the expected arrival date, applicable cut-off and whose working calendar governs the route.
Use route-specific evidence. Convera describes
SWIFT gpi status and alerts; Kanzum’s
payment workflow keeps references, status and next steps visible. Neither removes receiving-bank checks. Network-wide speed statistics should not become a delivery promise for your invoice.
Agree support hours, an escalation contact and who opens a bank trace. For a time-critical shipment, the useful commitment is a defined response and investigation process, supported by accessible transaction references.
Establish what happens when a payment fails or funds are restricted
Before launch, establish the procedure for incorrect details, compliance holds, rejected or returned payments, suspected fraud and outages. Know when cancellation stops being possible, who requests a recall and how returned funds are credited. Recall success is not guaranteed.
Kanzum’s published exception guidance, for example, distinguishes stopping a payment before release from requesting a bank recall after sending. It also explains that manual review can pause processing. Obtain the equivalent process for every shortlisted service and refer to its agreed cost schedule for financial consequences.
Keep an alternative approved payment route for urgent obligations. During a delay, check status before resubmitting to avoid duplicate payment, and establish whether unaffected balances remain usable. For account closure, obtain instructions for withdrawing the residual balance and retaining transaction records.
Checklist: Approve the provider for a controlled pilot
- Record acceptance of your UK legal entity, industry, counterparties and both required payment directions.
- Verify funding, holding, collection and settlement currencies, routes and limits against representative invoices.
- Compare complete outgoing costs and net incoming proceeds, including funding and FX timing.
- Approve the document pack, authorisation controls and reconciliation workflow.
- Review the contracting entities, fund protection, liability and available dispute routes.
- Agree delivery expectations, support ownership and exception handling.
- Complete a representative supplier payment and customer collection, reconcile both, and expand only after the results meet the agreed requirements.